Pepperl+Fuchs FVM58 ABSOLUTE ROTARY ENCODER

• Manufacturer: Pepperl+Fuchs

• Product no. : FVM58N-011AEA3GN-0813

• Product type : Multiturn absolute encoder

• Data format : F = Fast parallel

• Shaft version : V = Solid shaft

• Principle of operation : M = Multiturn

• Housing material : N = Aluminium, powder coated

• Shaft dimension/flange version : 011 = Shaft ÿ10 mm x 20 mm with clamping flange

• Connection type : AE = Plug connector type 9426, 26-pin (only axial)

• Exit position : A = Axial

• Option 1 : 3 = V/R, LATCH, PRESET

• Output code : G = Gray

• Option 2 : N = Not expanded

• Number of bits multiturn (Revolutions) : 12 = 4096 (only connection type K2)

• Number of bits singleturn (Resolution) : 08 = 256

• Shipping Weight : 2 KG

 

 

 

IMCOS-7011-V2 PA/GA Remote control panel for desk with handheld or gooseneck microphone

• The panel includes:
  • 25 pushbuttons illuminated polycarbonate keypad;
  • microphone with push to talk feature;
  • 1 illuminated emergency call pushbutton;
  • 1 dimmer for polycarbonate keyboard light;
  • 1 volume control for external loudspeaker when integrated with talk back system
• Different microphone options:
  • without microphone (IMCOS-7011-V2-0)
  • handheld microphone (IMCOS-7011-V2-1L)
  • gooseneck microphone (IMCOS-7011-V2-2L)
• Multiple remote control panels can be controlled by a proprietary network RS 485 data interface to the main unit
• Local loudspeaker bypass to avoid audio feedback
• Redundant power lines

DESCRIPTION

IMCOS-7011-V2 is a remote control panel, designed for announcements, pre recorded messages broadcast through the public address as well as talk back main station.

Designed to meet and exceed the requirements of ABS, BV, CCS, DNV-GL, LR, RINA, Norsok and UKOOA/PFEER.

Material Aluminium – black colour RAL 9005
Mounting Desk mounting
Wiring Terminal strip on the back
Cable glands 1 x PG16 (5/8”) – 1 x PG21 (3/4”) standard
Number and size can be configured according to the specific use of
the box
Dimensions Height 290 mm, width 215 mm, depth 150 mm
Weight 3,2 Kg

Contact EHRE(Shanghai) to discuss your unique interior communications requirements.

Flamonitec Compact Flame Controller for ATEX Zone 2

Since BFI Automation launched the first compact flame controller for continuous operation in 1990, we have been working continuously on optimising this technology. The compact flame controller combine the former system consisting of sensor and amplifier in one housing. The compact flame controller is connected directly to the burner control or control system. This eliminates the need for additional space for the amplifier/monitor and the associated cabling. Compact flame controller are therefore not only suitable for new equipment, but especially for retrofits or conversions.

Through various sensors and expansion stages, BFI Automation offers the right and most suitable compact flame controller for every area of application.
Whether single burners with different fuels or multi-burner systems as in large power plants with bus systems, we always offer the right solution.
Almost all compact flame controller can be supplied with fibre optic technology and/or for explosion protection in zone 1 or 2.

• IECEx-Certificate
• ATEX Zone 2
• IECEx-QAR
• High availability
• Technical support
• Maintenance free
• Coverage of different spectral ranges

Gitiesse IMCOS

• 

• 

• 

Gitiesse IMCOS (Integrated Multi-Media Communication System) is an umbrella digital network that integrates all the internal communication and distribution of alarms and signals onboard a ship.

Who is Gitiesse?

Gitiesse is an Italian based company. In 1979, it was established as a Trading company by the technical company Girotecnica. In 1985, the two companies merged. In 1994, Gitiesse designed the first IMCOS system in the world. Since then, over 2000 systems have been installed worldwide.

IMCOS‘s “open architecture” modular design, enables versatility and customization to meet the unique requirements of a vessel, regardless of size or electronics configuration; from coastal craft to supertankers. IMCOS installations include major passenger vessels, super-yachts, merchant & naval ships, cargo ships, oil and gas maritime applications and more.

Typical IMCOS Basic “Section” Configuration:
• General & Fire Alarm • Public Address • Sound-Powered Telephone • Ship Service Intercoms • Automatic Telephones • Radio & TV Signal Distribution Network • Surveillance CCTV • Engine Room Signal Columns • Computer Data Network • Optional: music channels, automatic messaging, passenger info, etc.

IMCOS systems are certified ISO 9001/2000 and type approved by the major Ship Classification Societies.

Contact EHRE(Shanghai) to discuss your unique interior communications requirements.

Crowcon Multi-function display pump-suction gas detector Xgard

• 

• 

The Xgard Display Series gas detectors are specifically designed to protect operators from potential personal injuries in complex operating conditions. It can detect the dangers caused by toxic gases, combustible gases and hypoxia, and remind operators to take immediate countermeasures.

The Xgard display series is available in different sensor type configurations to meet different inspection needs on the job site. The pump suction type is optional, and the flameproof suction pump pumps the gas to the gas detector from the far end (within 100m) for detection and alarm, or draws gas from the periphery of the detector to speed up the reaction speed.

Features

* Flexible installation allows for wall-mounting or ceiling-mounting without the need for additional brackets
* Guided operation menu, simple and easy to use
* Non-intrusive magnetic rod calibration without the need to open the lid on site
* Bright OLED display for low temperature environments to minus 40°C applications
* Integrated sound and light alarm, 110dB@10cm (optional)
* Different types, multiple sensor configurations, can detect 100 gases
* Rich output signals, in addition to 4-20mA current loop signal, provide up to 3 relay outputs
* MODBUS、HART(optional)
* Sensor type: catalytic combustion, electrochemistry, PID (VOC detection)
* Protection class: IP65,IP66
* Probe sensor lifetime: Xgard gas: 2-3 years

Pepperl+Fuchs Barriers

Intrinsic safety barriers are the core of Pepperl+Fuchs’ product portfolio. We offer the widest selection of products for protection of electrical signals located in hazardous areas. These intrinsic safety modules combine the energy limiting features of a zener barrier with galvanic isolation. Pepperl+Fuchs offers systems for different applications and mountings.

K-system

Our most popular intrinsic safety isolated barriers are the flexible DIN rail mounted K-System modules. The K-System intrinsic safety barriers connect easily with our Power Rail assembled in the DIN rail. The use of the Power Rail reduces the wiring by energizing the modules mounted on the DIN rail.

Z-system zener barriers from Pepperl+Fuchs are directly mounted on a 35 mm DIN-Rail. Through accessories, the required grounding can be done directly on the DIN mounting rail.

• Fast mounting on the DIN-rail
• Grounding directly connected with DIN-rail
• Separation of field loop by removing the fus

Z-system zener barriers are available with high density up to 2 channels / 12,5 mm width. Variants with field replaceable fuses provide a convenient means of disconnecting or open-circuiting the instrument loop without interfering with the wiring, making commissioning and maintenance operations much easier.

Contact:

info(at)ehresh.com

info(at)ehresh.net

HYDAC Electronic Pressure Sensor

Pressure Sensors

Electronic pressure sensors are used for recording pressures in fluid technology systems. Functionality and form of execution are determined by the respective utilisation conditions. In order to fulfil these requirements, HYDAC offers a comprehensive programme from miniature pressure transducers to customer-specific multiple pressure switches.

Electronic pressure transducers record the measured pressure variable and convert it into a proportional output signal.

Electronic pressure switches record the measured pressure variable, process it and output a switching signal in accordance with the presetting.

BFI Automation

German TÜV-proofed Flame monitoring – and evaluation devices are the most prominent products in a wide spreaded BFI Product range. 

The variety of application and functionality of the devices is based upon a longstanding exchange of experience.

Flame Scanner

The BFI Automation offers a wide spectrum of flame scanners, which are developed for the operation at utility steam generators and industrial boilers. The extreme requirements to the monitoring of combustion under Low NOx- conditions was focused mainly. All flame scanners form in combination with a flame amplifier of the series 3000/ 4000 a complete flame monitoring system. The flame monitoring system 3000/4000 was developed in consideration of safety-related progresses and the optimal availability of the plant. The goal is a safe and reliable monitoring of furnaces as well as supplying criteria for the optimization of the combustion process and the reduction of pollutant emission. The system is able to distinguish different flames from burners in one combustion chamber and thus also to control selectively. 
By using wear-free sensors the flame monitoring system 3000/4000 is nearly maintenance-free and allow a reliable and longtime furnace operation. 

Flame Amplifier

The flame monitoring and rating system 3000/4000 is based upon different flame amplifier build in 19″-plug-in technic according to DIN 41494. All control logics are included and signals for the external processing are provided. The flame amplifier forms in combination with a flame scanner of the series 3000/4000 a complete flame monitoring system. It was developed under considering of safety related progresses and optimal availability of the plants. The goal is a safe and reliable monitoring of combustion plants as well as the providing of criteria for optimized combustion processes and reducing pollutant emissions. The system is able to distinguish different flames from burners in one combustion chamber and thus also to control selectively. 

Popular Types:

Compact Flame Controller 8.30 / 8.40 / 8.70

Compact Flame Controller CFC100 / CFC1000 / CFC2000 / CFC3000

Flame Scanner 2 / 2.0 GT / 2.0 L / 2.0 LA

Flame Scanner 3.31 / 3.32 / 3.40

Flame Scanner 4.0 / 4.1 / 4.2

Flame Scanner 7.0 / 7.1

Flame Amplifier 3001 / 3001D

Flame Amplifier 3016 / 4001